craigslist | tools in corvallis/albany

Snap-On Tools Flare nut set (cheape) (Harrisburg) $55

2009-12-29T19:03:25-08:00

Snap-On Tools Flare nut 5pcs set in protective caseI have a in good shape Snap-On Tools Flare nut 5 pcs standard size set in protective carry case.These are double ended the sizes are 1/4to5/16 , 5/16 to 3/8 , 3/8 to 7/16 , 1/2 to 9/16 , 5/8 to 11/16 all in good shape no rust nice finish I paid $160.00 for the set need to get rid of just sitting around Any questions please call (541)-619-0252 thanks. $55.00

5hp 60 gal 2 stage 16 cfm compressor (Sweet Home) $500

2009-12-29T18:52:27-08:00

5 hp 2 stage 60 gal compressor, 16 cfm mainly used for home use. very low hours. look great aprox 10 years old, $500 firm

7.5 Hp Baldor Motor-newly lowered price (Corvallis) $135

2009-12-29T18:42:47-08:00

3phase AC Baldor Motor 7.5 horsepower 3600 RPM

Flex Conduit and new #10 wire leads

LIKE NEW $135.00

If you need a work horse motor, this is it!

Sears 18" Table saw (Lebanon) $125

2009-12-29T17:51:25-08:00

This a nice saw that works really good. Just taking up a lot of space in my garage.

Air tools (lebanon) $1554

2009-12-29T16:10:57-08:00

Many air tools for sale. Description part number price new sale price

1/2 " Impact gun snap-on 700 FT LBs of torque XT7100 $370.00 $150.00

3/8 Impact gun snap-on IM3100 $330.00 $130.00

1/4 Impact gun Snap-ons blue point series AT225B $196.00 $75.00

3/8 Air ratchet snap-on FAR7200 $359.00 $140.00

1/4 Air ratchet Snap-on FAR25A $290.00 $100.00

90 degree Die grinder snap-ons blue point series AT118 $130.00 $50.00

Straight handled die grinder Snap-on PT200 $226.00 $75.00

90 Degree Air drill Snap-on blue point series AT811 $186.00 $90.00

Air hammer super duty 2500 BPM snap-on PH3050A $290.00 $140.00

Air Vacuum snap-on blue point series AV1000 $68.00 $34.00

Multi meter Snap-on blue point series EED504C $226.00 $100.00

Air Rivet gun Snap-on Holds all sizes of rivets HP310 $303.00 $150.00

Radiator air lift filler RADKITPLUSA $235.00 $100.00

Door holding stand for Jack holds door level when $150.00 $65.00
replaceing door pins and bushings

Die grinder Burr set VWB800C $217.00 $90.00

Air hammer bits all snap-on Flat chisel PHG84A $28 $15.00
tapered punch PHG59A $32.00 $15.00
round hammer PHG71A $30.00 $15.00

Scrapper set set of 5 snap-on blue point series MS3000 $46.00 $20.00

Total $3477.00 $1,554.00

OR TAKE IT ALL FOR $1,200.00
Contact Jim with any questions. 206-947-2773 or jbooth73@yahoo.com

Garage Gorilla Motorized Storage Rack NEW (Albany, OR) $125

2009-12-29T15:55:21-08:00

Brand New in the Box. I bought two and do not need the second one. Great for garage or shop organization. Needs access to an standard electrical outlet to operate the motor. More information can be found at Sears.com or Target.com. Retails for $169.99

Product Description:
Garage Gorilla motorized storage system makes organizing fast, easy and safe. At a touch of a button, you can raise and lower some of your most frustrating clutter for a cleaner garage area. Hang bikes, golf clubs, canoes, kayaks or anything that you want up and out of the way. With it's 125lb motor it will hold up to 125pounds, or up to 4 bikes. The remote key lock switch features a safety key that only you use, so you determine who can raise and lower the lift.

Phone 541-981-1046

Sawzall Crafsman (Shedd) $10

2009-12-29T09:34:52-08:00

Older Craftsman sawzall variable speed $10 cash only I will not ship No Scammers

1/2" Drill Speed Way Mfg. Co. (Shedd Near Albany) $10

2009-12-29T09:32:20-08:00

Speed Way Mfg. Co. 1/2" Model#400 speed drill $10 Cash only I will not ship Please email posting for info No Scammers

36 volt charger (sweet home) $40

2009-12-29T06:56:05-08:00

30 amp. email for info

belt sander (sweet home) $25

2009-12-29T06:52:37-08:00

email for info

Delta Drill Press (Corvallis) $149

2009-12-28T16:28:20-08:00

Delta Model DL300L Drill Press, barely used.

24' ladder (Lebanon) $100

2009-12-28T16:03:39-08:00

Werner 24' extension ladder in good condition. Call 541.234.7618 to make arrangements.

Cincinnati #3 Horizontal milling machine with Bridgeport vertical head (Sweet Home) $2995

2009-12-28T13:59:37-08:00

This is a very clean looking machine, I have never fired it up. Any ? I will do my best to answer them. Make me an offer, I am very open on this, looking for shear , press brake , plasma, Tools Trade ???

20 gal parts wash solvent tank $50 (lebanon)

2009-12-28T13:08:38-08:00

20 gal parts wash solvent tank $50 myspace.com/used_parts mike 541 936 2417

Ridgid jig saw (Albany) $85

2009-12-28T12:03:47-08:00

Very nice, nearly new Ridgid jig saw with case and blades. 6 Amp Heavy Duty Motor. Variable Speed Dial with Electronic Feedback. Toolless Blade Change. 5 Orbital Settings

$149 at Home Depot

Nice tool! I upgraded to a band saw and don't need both.

Email me and I will send you my cell #.

snap-on tool box combo (lebanon or) $4500

2009-12-28T11:39:35-08:00

snap-on tool box with hutch and stainless steel top. Bought new 3 years ago, the box was 6500, hutch 2100, and the stainless top 600. i changed careers and want someone to get some use out of the box. fill free to call, text or e-mail me with an offer or questions. Sorry but NO trades so dont ask. 206-947-2773 e-mail jbooth73@yahoo.com

snap-on Tool box roll cart (lebanon or ) $900

2009-12-28T11:38:41-08:00

snap-on role cart, bought new last year for 1195.00. perfect condition, sorry no trades so dont ask. feel free to call,text or e-mail me with an offer or questions. 206-947-2773, jbooth73@yahoo.com...

Hydraulic Ram (Lebanon Oregon) $25

2009-12-28T11:24:30-08:00

This is a short Hydraulic ram for sale. It came off of a Tire changer and is very powerful. It could be used for a number of things. If you would like to see it or have questions, email me or call me at 541-619-3120.

Hydraulic Ram (Lebanon Oregon) $50

2009-12-28T11:08:53-08:00

I have a hydraulic ram that came off of a truck and was used for a an engine hoist. This is a manual pump style ram, and it works very well. Fully extended, it is approximately 5 feet tall. If you would like to see it or have questions, email me or call me at 541-619-3120.

Craftsman Arc Welder (Lebanon Oregon) $75

2009-12-28T11:03:28-08:00

I have an older Craftsman Arc Welder for sale. The welder comes with some accessories including two helmets, lots of welding rods, 3 pairs of welding gloves, a wire brush and a slag hammer all pictured below. The welder works well. I'm asking $75.00 firm. If you would like to see it or have questions, email me or call me at 541-619-3120.

Hydraulic Ram (Lebanon) $100

2009-12-28T10:31:58-08:00

This Hydraulic ram is about 5 feet tall when fully extended It also has the pump. It is a pump and fluid reservoir all in one. This is a very nice unit and could be used for many different things. New, this would probably run you much much more. I'm moving out of my shop and have to get rid of a lot of stuff. If you have any questions or would like to see it, you can contact me via email, or call me at 541-619-3120.

10" Skilcraft table saw (Adair Village) $55

2009-12-28T09:14:01-08:00

10" Skilcraft table saw in good working condition with several blades. Cash only.

19"sidney engine lathe (sprfld) $1500

2009-12-28T08:48:56-08:00

8' between centers, 4 chucks, lots of tooling, this lathe is old but good..220 single phase. 1500$ obo or trade. mike 541 913- 7151 or 541-726-4922

chicago electric "Hobby Arc" (Albany, Oregon) $50

2009-12-28T00:12:07-08:00

posting title says it all I have a chicago electric hobby arc 110/230v arc welder with a little bit of rod and a mask up for 50 bucks. email for more ?

16" Craftsman Scroll Saw (NW Corvallis) $20

2009-12-27T21:52:20-08:00

A 16" Craftsman Scroll Saw.

A touch of rust here and there from sitting in a garage, but it works fine. Table tilts.
This saw uses pin-end blades, but you can buy an adapter to use plain-end.
Single-speed.

$20

CLC & Husky tool pouches w/ belt (Corvallis) $5

2009-12-27T20:25:04-08:00

CLC and Husky tool bags with belt.
asking $5 for all.
call/text 541-760-8883 - not after 9pm please

Air tank - 10 gallon (Philomath) $15

2009-12-27T16:46:03-08:00

Small, older air tank (receiver). Has wheels, but handle is missing. Still holds pressure.

Unfortunately, no pictures at this time.

Professional Heavy Duty Craftsman Planer-Molder (Corvallis) $320

2009-12-27T12:33:17-08:00

Professional heavy duty Craftsman Planer-Molder & Stand. Model 306.2338700.
5 HP motor, 240v.
6" throat, 12" rollers.
Manual included. In great shape. I never use it; need the space.
$320 OBO (was $480, then $380).
Rick @ 541-760-9160

10" Craftsman Table Saw (Corvallis) $40

2009-12-27T12:28:50-08:00

10" Craftsman Table Saw on integrated stand with wheels, plus on-board switch and outlets with extra long heavy-duty cord (110v).
Vintage machine, but with a very large motor - works great. I need the space!
$40 (was $65).
Rick @ 541-760-9160

2 Plainer/Joiners (lebanon) $50

2009-12-27T12:12:14-08:00

2 Plainer/Joiners 1 Sears, 1 Mont. Wards. Both have 1/2 horsepower motors
and mounted on tables. Both work, 1 needs blades
Take both for $50
541-451-5664

19.2v Craftsman c3 Trim Saw (alb) $50

2009-12-27T11:55:02-08:00

I recently purchased a combo set and it came with this saw, but I dont really need this. It is brand new, it does not come with a battery. If you were to purchase this at sears it would be $65-70. I am selling it for $50.

Craftsman C3 19.2 volt 1/2" DRILL/DRIVER (Albany) $65

2009-12-27T11:53:45-08:00

I am selling a lightly used Craftsman C3 drill/driver. I am selling it because I got a different one for christmas and dont need two. It comes with a charger and a nearly new battery for $65. This is the heavier duty version of the craftsman drill, much more power then the 3/8" version. Let me know. The picture is without the battery, but it does come with one.

Drill (Corvallis) $25

2009-12-27T11:04:26-08:00

Little used drill. Moving to apartment. Not needed. Lots of wood screws included. 541-207-5924.

SAW (Corvallis) $25

2009-12-27T11:03:48-08:00

Unused saw. Moving to apartment. Not needed. $25. 541-207-5924.

Cornwell Rolling Cart (Albany) $450

2009-12-27T10:02:41-08:00

Brand new Cornwell rolling mechanics cart, locking lid and drawers. Ball bearing slides.

Please call or text 541-404-5037

Thanks

hi-lift jack, like new (Corvallis) $60

2009-12-27T08:14:07-08:00

Ive had this hi-lift jack in my garage for over a year now, never used it, just sat there collecting dust. Its in great condition - not even greased so its pretty much new. I have no use for it, just want to sell it. call/text 541-760-8883 - no calls/texts after 9pm. thanks $60 cash

3 Stihl leaf blowers (Corvallis/Salem)

2009-12-26T21:32:23-08:00

3 Stihl leaf blowers, model #420,
3 years old, in good condition.
can be sold individually or as a pack.
$150 each or $400 as a pack.

Welding tanks (Albany) $100

2009-12-26T19:03:07-08:00

I have a 40 cuft oxygen and a 40 cuft acetylene tank for sale I will sell both tanks for $100. I also have a Victor welding and cutting torch available for $100 Les 541-990-4464

Victor portable torch kit (Albany) $175

2009-12-26T18:57:19-08:00

Victor portable welding and cutting torch kit. featurea a Victor J-50 torch handle, 3 welding tips, and cutting attachment. Set also includes a MC acetylene cylinder, a 20 cu ft Oxygen cylinder and carying tote All items are in good condition. call Les at 541-990-4464 or email toolsandtoys@yahoo.com

tools (corvallis) $1

2009-12-26T17:38:08-08:00

bosch jig saw SOLD

senco duraspin screw gun with bucket of 800 plus sheetrock screws. only had 150 screws max run thru it still like brand new come with case. 125

dewalt 18 volt xrp drill light use comes with case charger and 2 batteries. 150

4 inch MK tile/granite saw. light use. 50

rigid fiber cement saw SOLD

craftsman shaper 1/2 hp (corvallis) $350

2009-12-26T17:15:29-08:00

lightly used craftsman 1/2 hp shaper with stand. heavy duty and has 3 blades one of them cost 280 by itself.

10" Jet ProShop Hybrid Table Saw (Jefferson) $650

2009-12-26T16:38:10-08:00

10" Jet ProShop Hybrid Table Saw Left Tilt 1 and 3/4 HP. Cast Iron Extensions 36" Fence. Currently wired for 220 but can be easily wired for 110. Only used for a year but I got a Unisaw for Christmas and now I have no room in my shop. Pictures to come later or email me with a phone number and I can text you pictures... $650 OBO

Vintage Milwaukee Drill (Lebanon) $10

2009-12-26T16:20:51-08:00

Vintage Milwaukee Drill 1/4 inch with chuck key. Runs strong

Quickrete manual cement mixer (Lebanon) $17

2009-12-26T16:20:39-08:00

Manual cement mixer. Mixes 80lbs at one time.

This mixer is in good used condition. The mixer is essentially a plastic bucket with paddles for agitation and a wide lip mouth with rubber gasket and course thread screw on lid.

Easy to USE.. Fill with concrete add water replace lid roll around on ground to mix then pour.

Shopsmith Shop Vac (Albany) $150

2009-12-26T16:18:03-08:00

Shop Vac dust collector for shop and wood tools. Please call for more information. 541-928-7901, ask for Allen

DeWalt 18v XRP Model DW988 (Lebanon) $120

2009-12-26T15:48:55-08:00

Comes with battery, charger, case, 8 spade drill bits, bit holder and new driver bits and I'll throw in DeWalt XRP stickers and a Dewalt XRP soda can foam wrap.

This is used in good working condition. Charged and ready to go!!

Cement Mixer (Manual Drum) (Lebanon) $17

2009-12-26T15:32:30-08:00

Manual cement mixer. Mixes 90lbs at one time.
This mixer is in good used condition. The mixer is essentially a plastic bucket with paddles for agitation and a wide lip mouth with rubber gasket and course thread screw on lid.
Easy to USE.. Fill with concrete premix add water replace lid roll around on ground to mix then pour.

Whole Shop Dust collection system (Rigid) New in box - (Lebanon) $50

2009-12-26T15:13:17-08:00

Rigid Whole shop dust collection system designed to work with your shop vac or of course RIGID's shop vac or can be used with your dust collector with an adapter. This system includes the 10 foot long hose to custom fit to your shop components. "Made in Canada" Retail is over $100.00 .
All in one box - This is one complete kit with all components as follows:
Qty of 6-3' x 2" O.D. Plastic tubing
Qty of 2-"TY" Fitting
Qty of 4- Blast gates (Vac gates)
Qty of 2- 90 degree elbow
Qty of 2- 45 degree elbow
Qty of 4- pipe couplings
Qty of 10- Pipe mounting clamps
Qty of 6- hose ends
Qty of 1- 10' x 2-1/2" Hose
Qty of 1- Parts bag of mounting hardware
Qty of 1- Instruction manual

New Super Z LT Cable Chains ZT729 (Lebanon) $45

2009-12-26T15:03:53-08:00

Super Z LT : Stock No. ZT 729 Made in the USA

I bought these awhile ago and never used them so they are NEW condition. Retail for $99 - $129
Comes in original plastic case with tighteners, gloves, instructions. The case has a little wear from being in my trunk. Shown is a stock picture of the product.

Super Z LT Cable Tire Chains are the only light truck traction products to meet Class "S" clearance requirements for vehicles with limited or low clearance. It's the most effective product available for SUVs and pick-up trucks with ABS, All-wheel drive, four-wheel drive and anti-lock brakes.

Features

� Fastest, easiest installation of any traction product.
� Better all-around traction performance than conventional tire chains or cable chains.
� Greater durability than conventional tire chains or cable chains
� Better compatibility with anti-lock brakes, traction control, all-wheel drive and other electronically-monitored control systems.
� Meets S.A.E. Class "S" clearance requirements for vehicles with limited clearances.
� Low potential for damage to vehicle body and mechanical components, even when abused.
� Chain tighteners are REQUIRED and INCLUDED.
� Super Z LT's plastic package includes rubber tighteners, step-by-step illustration for product installation and removal and waterproof gloves.

Fits the following:
8.75-16.5LT 205/75R17.5 215/75R16C 215/75R17.5 215/80R16 215/85R16LT 225/60R18 225/70R17 225/75R16 225/75R16LT 225/75R17 235/55R19 235/60R18 235/65R17 235/70R16 235/75R15 235/75R15LT 245/45R20 245/50R19 245/55R18 245/60R17 245/65R16 245/70R15 255/45R20 265/60R16

Proxxon Micromot Keyless Chuck (Philomath/Corvallis) $8

2009-12-25T13:27:31-08:00

Here is the description from Amazon where I bought it:

http://www.amazon.com/gp/product/B0016ZS90Q/ref=cm_rdp_product

The deal is.....this unit will fit many of the Proxxon Micromot grinder, router, rotary tools, etc., except the 38481 IB/E Professional Rotary Tool.....which is the one I have. This item is still new in the unopened box. Call if you want to see it. I live near Philomath but travel to Corvallis frequently. I don't want to go way out of my way for this $8 item but I can meet up with you in the local area. Call Steve 929-5937

static phase convertor "new" (albany) $115

2009-12-24T18:10:46-08:00

new bought it last week thought i needed one for each machine, it will run several machines.
i am useing the other one i bought to run a milling machine and a 3 phase band saw.
it is rated for 1 to 3 hp. 240 volt
541 990 3969

Delta Rockwell Jointer (Philomath) $40

2009-12-24T16:28:37-08:00

Older HomeCraft 4" jointer by Delta Rockwell. It is missing a couple of parts (e.g., fence attachment and angle adjustment), but can be put back into service with a little attention. Model # AM-5673.

Comes with a 3/4 hp, 115/208-230V Dayton motor, 1-phase.

NAIL GUN, ROUTER, PLANER (Lebanon) $75

2009-12-24T10:04:45-08:00

Craftsman industrial planer. Excellent condition. $75. Porter/Cable 2 1/2 inch finish nail gun. Excellent condition. $100. Two Porter/Cable routers. These are in excellent condition. $200 for both. 1-541-990-4982

3/8" Drive Deep Impact sockets (Albany)

2009-12-24T00:53:13-08:00

I have some different sizes and brand name impact sockets like new. The following is a list of the number of sockets, the size of the socket and what I would like to get per socket based on my on line search info. All the sockets are not pictured. I am interested in offers for the whole lot.

1 - 1" x 2-1/2" deep CR-MO (sunex?) Taiwon @ $5.00
11 - 26mm x 3-1/16"deep Armstrong U.S.A @ $10.00 each
2 - 11/16" x 2-3/4" deep Proto U.S.A @ $5.00 each
1 - 11/16" x 2-15/32" deep Craftsman U.S.A @ $4.00
1 - 15mm x 2-15/32" deep Craftsman U.S.A @ $4.00
1 - 13mm x 2-1/2" deep Craftsman U.S.A @ $4.00
1 - 13mm x 1-5/8" semi deep Matco U.S.A $7.00

If you are interested please give me a call or you can reply to this ad. I can be contacted at Albany/Verizon 541-990-4118, Sorry NO TEXT, leave a message if I am unable to answer.
AS LONG AS THE AD IS POSTED I HAVE THESE AVAILABLE, I edit or remove my ads as soon as there is a change in the status of the listed items. Thanks for looking.
DO NOT E-MAIL OR CONTACT ME IF YOU ARE NOT INTERESTED IN THIS ITEM FOR SALE!! ANY REPLIES FROM G-MAIL WILL BE IGNORED AS STATED BELOW.
I AM NOT INTERESTED IN YOUR SPAM. I FORWARD "ALL" SPAM E-MAILS TO "SPAM@CRAIGSLIST.COM." ( I ENCOURAGE EVERYONE ELSE TO DO THIS TOO )

Welder (Albany) $75

2009-12-23T15:59:03-08:00

I have a Sears Craftsman 295 Amp stick welder in good working condition for sale email toolsandtoys@yahoo.com or call 541-990-4464

Homelite Chainsaw (Lebanon) $25

2009-12-23T14:24:24-08:00

Old homelite chainsaw. Does not start, but used to run fine.

dayton hoist 1/2 ton $1000

2009-12-23T10:44:37-08:00

New in box hoist. 110v/220v. Chain 1/2 ton hoist with 25' of lift. Chain bag included.
Paid 1800 then decided to go bigger.
Sell for $1000 cash or open to trades.....

Craftsman Table Saw (Corvallis) $75

2009-12-23T07:35:51-08:00

10 inch Craftsman table saw, older model but runs great. I inherited a much newer model and don't need two.

5 gal shop vac (Albany) $5

2009-12-22T17:57:14-08:00

works, but doesn't have hose.

Joel (509) 899-1644

Power Grip Suction Cups (Sweet Home ) $60

2009-12-22T15:06:24-08:00

Woods , Power grip Suction Cups, set of 2 Model # GO695, in excellent condition . please call 541-228-1311

Porter Cable Router (Sweet Home ) $75

2009-12-22T14:57:16-08:00

Porter Cable Router 3 1/4 .Newly reconditioned, solid tool with extra bases ( also selling seperately many carbide tips) not a variable speed model #75192 router base is model # 75361 please call 541-228-1311

carbide blade (Sweet Home ) $75

2009-12-22T14:46:50-08:00

60 tooth carbide blade , 10 "

Carbide router bits (Sweet Home )

2009-12-22T13:43:06-08:00

Misc carbide router bits . may sell as lot or individually please call 541-228-1311 to make offer

Clamps (Sweet Home ) $50

2009-12-22T13:39:32-08:00

TG30AC Bessey "F" Clamps 12 x 5 1/2. selling 8 clamps total, price is for all 8, sold as a lot (to buy new price would be $25.99 each) call 541-228-1311

Compressor (Sweet Home ) $50

2009-12-22T13:19:59-08:00

Sears 5 hp. Good working compressor need pressure relief valve repaired. very dependable , please call Marvin at 541-228-1311

phase convertor new (albany) $120

2009-12-21T21:54:06-08:00

brand new 1 to 3 hp phase convertor, perfect to run a bridgeport mill or other 3 phase equipment
from your home shop. comes with simple instructions and i can even show you how to add a
idler motor to make it a rotary phase convertor 541 990 3969

4 BURNER GAS HEATER (3LAKES) $495

2009-12-21T21:23:02-08:00

MADE DY AMANA ,73600 BTU , NEW NEVER FIRED CAN DELIVER , CALL 541 981 2648 .

Craftsman Radial Arm Saw (Lebanon) $225

2009-12-21T17:01:29-08:00

Craftsman Radial Arm Saw, Good Condition

Moving and do not want to haul

JOBOX On-Site Chest (Newport) $250

2009-12-21T13:53:15-08:00

250.00 or best offer

You pick up!

JOBOX On-site Chest
L36 W20 H23-3/4 8.3cu/in

Kargo Master Truck Rack (Albany) $400

2009-12-21T13:42:09-08:00

Like new Kargo Master truck rack. Currently on Ford Ranger pickup. Fits similar small trucks. Will hold ladders of all sizes.

Binks Spray Paint Pump (Corvallis/Albany) $61

2009-12-21T13:41:38-08:00

Binks spray paint pump unit. Mod# 41-41. The unit is clean. I have never used it, but it was used when I bought it. Don't have much more information. $61.00 OBO. (Trade?)

email with any questions.

Craftsmen table saw(only a year old and not much use) $100

2009-12-21T13:19:09-08:00

Selling a 1 year old table saw, works perfect but no need for it since we have other ones. asking 100 obo cause we need it gone asap since its taking up space.

Tile Cutter Splitter (Jefferson) $5

2009-12-21T11:17:15-08:00

This is a scribing tile cutter and will handle tile up to 6 1/4". To use just draw the scribe across the tile, set the wide portion in the center of the tile and press down. eMail or call (503) 871-9217

DeWalt 18v XRP Drill Driver Hammer (Lebanon) $120

2009-12-20T23:28:54-08:00

DeWalt 18v XRP Model DW988

Comes with battery, charger, case, 8 spade drill bits, bit holder and new driver bits and I'll throw in DeWalt XRP stickers and a soda can foam wrap.

This is used in good working condition. Charged and ready to go!!

Tile tools for sale (Corvallis) $100

2009-12-20T22:26:11-08:00

I have various tile tools and carrying bag with bucket heaters for sale. If your a tile installer or do it yourselfer these tools will be great! Call me at 541-974-0757

belt sander (sweet home) $25

2009-12-20T20:03:49-08:00

Tired of it taking up space. $25 or offer

Shop Vac (Albany) $20

2009-12-20T17:43:31-08:00

Genie 16 Gallon Wet/Dry Shop Vac.
Works perfectly!
$20.00 OBO

Snap-On 13 drawer roll away tool box (Albany) $1100

2009-12-20T13:22:37-08:00

Great condition 13 drawers. comes with drawer mats. I have both keys for it also
$1100 obo
Call or text anytime. 541 409 0769

luhr jensen smoker "little chief" (corvallis) $25

2009-12-20T12:27:03-08:00

Luhr jensen "little chief" smoker. 541-740-0741

large turkey broiler (corvallis) $40

2009-12-20T12:22:58-08:00

Large cooker broiler. Stand and attachment to hook to propane tank. metal pot with lid. Also three gallons of peanut oil. Don't think it has ever been used or it was cleaned immaculately. 5417400741

Maxa 5000 Generator For Sale (Corvallis) $375

2009-12-19T22:12:16-08:00

We have a Coleman Maxa 5000 watt generator for sale. It's in perfect condition and has less than 30 hours run time. We recently had it serviced and it runs fine. This generator provides both 120v and 240v and is rated continuous use at 5000 watts. It's ideal for home use during a power outage to keep freezers running, power well pumps, and keep the lights on. It's also ideal for remote power needs. Take it to the job site and power up almost any tool.

We recently upgraded and don't need two.Origional price was over $600.00. Were asking $375.00. Give a call if you want to come take a look.

Brad 541 760-8284

troy built lawn mower (sweet home ) $125

2009-12-19T17:18:37-08:00

troy built lawn mower paid 329.00 asking 125.00 doesnt have the grass catcher ,but starts right up and runs good ...call linda at 541-409-1922 will post picture soon

DeWalt Optical Builders Level (Corvallis) $225

2009-12-19T16:54:20-08:00

Top of the line optical builders level with tripod and Measuring stick. With case, manual and original box.

DeWalt's best optical instrument easy to use and set up. Model DW090.

Never used.

541-754-1857

Craftsman 10-in Table Saw (Lebanon) $50

2009-12-19T15:21:25-08:00

Do not know much about Table Saws, it does work well.

large air compressor dayton (lebanon) $150

2009-12-19T13:00:27-08:00

This is a single phase 220 volt compressor in good condition not portable very heavy
phil 990 6354

WTB old Dewalt Radial Arm Saw

2009-12-19T08:42:03-08:00

I am looking to buy an old Dewalt Radial Arm Saw, the older the better. Please reply to this ad with photos and description.

wanted snap on stainless top (eugene) $1

2009-12-19T00:41:17-08:00

Looking for stainless top for my toolbox. I have a krl7022 but box is 54x29 same as 1001 1022 or ? looking for riser for same also

Kennedy Tool Boxes (Roll chests, bench) (Philomath) $450

2009-12-18T21:02:33-08:00

A full set of Kennedy tool boxes setup on a cart to roll around site. Locking w/ key. Has huge casters and a brake. Must see, cost over 1600, sell for 400. Or trade for Miller 175.

plasma cutter (philomath) $1500

2009-12-18T18:04:15-08:00

Thermal dynamics pak master 150 XL plasma cutter. I have 4 pieces of track,Koike max3 trolley car and extra parts.1500.00 or best email or call 541-929-2786 ask for Brad.

Milwaukee 14.4v hammer drill/driver (corvallis) $50

2009-12-18T17:48:39-08:00

Milwaukee 14.4v pistol grip hammer drill/driver with charger, case, side handle and ....... 2 DEAD BATTERIES

260 new, sell for 50.00

call 541-829-9510

makita cordless sander new in box $20 (lebanon)

2009-12-18T16:03:08-08:00

makita cordless sander new in box $20 myspace.com/used_parts mike 541 936 2417

drill doctor drill bit sharpener (lebanon) $100

2009-12-18T15:37:13-08:00

drill doctor drill bit sharpener 1/2" chuck and 3/4" chuck nice shape diamond stone will do 115 degree to 135 and split point bits $100 myspace.com/used_parts mike 541 936 2417

Cordless Ryobi Skill Saw 18. 0V (Corvallis) $40

2009-12-18T14:51:48-08:00

Paid $100 for it new. I have only used it a few times. Comes with several new blades and I have the charger and the book for it. Works great, I have never had trouble with it.
you can call 541-760-7642 and ask for Jamey

Ryobi Router (Corvallis) $30

2009-12-18T14:51:39-08:00

Got this for a project but never used it. It has been sitting on my work bench for a year. Yours for $30. Brand new sells for $60.

20 gal parts wash solvent tank (lebanon) $50

2009-12-18T14:47:22-08:00

20 gal parts wash solvent tank $50 myspace.com/used_parts mike 541 936 2417

hilti DXA41 powder actuated nail-stud gun (sweethome-lebanon) $350

2009-12-18T12:11:36-08:00

hilti dxa41 .27 cal semi automatic nail & stud gun, excellant cond., with lots of fastners, extra head for 3/8" studs, 2extra anvils, 1 extra barrel. 38-10 rnd clips,r-18 washers, r-36 washers, misc.nails diff. lengths, misc.studs-1/4&3/8 diff. lengths, 3/4" emt brackets, 1"emt brackets, l brackets. $350obo 541-401-0755

vestype full body safety harness (sweethome-lebanon) $40

2009-12-18T12:10:20-08:00

never used safety harness with removable belt & body pad, mod# 415227 XLG $40obo 541-401-0755

Stihl Concrete saw (Demo Saw) (corvallis) $300

2009-12-18T11:11:33-08:00

Stihl TS400 Hot saw. Works great, abrasive blade included.

fivefourone-760-2336

AC Gearmotor (S.E. Albany) $30

2009-12-18T10:42:28-08:00

Up for sale is a 1/16th HP Shibaura parallel shaft gear motor. The voltage is 115 AC single phase 60Hz. The output RPM is 85; the shaft looks to be 3/8" diameter with a keyway slot. The motor comes complete with capacitor and is ready to be attached to your application. These motors are typically in the hundreds of $$ when priced at Graingers or other suppliers. Please reply to this post with questions or call 541-981-0744. Thanks for looking and Merry Christmas!

DELTA MITER BOX SAW (Albany, Or) $50

2009-12-17T14:38:28-08:00

Lightly used Delta Miter Saw. Excellent condition. $50 or Best Offer.